CAT6-UTP-PATCHCat6 (Class E)
U/UTP Cat6 Patch Cord
Cat6 unshielded patch cord with 26 AWG stranded copper — gigabit and PoE+ patch links that keep channels clean and termination-free.
Category
Cat6 (Class E)
Conductor
26 AWG stranded tinned copper
Jacket
PVC / LSZH
Type
Cat6 U/UTP patch cord
- ✓Factory terminated and 100% tested to Cat6
- ✓26 AWG stranded tinned copper — no CCA
- ✓Center spline reduces crosstalk in the patch path
- ✓Snagless molded boots protect the latch
- ✓Supports 1G/10G (short channel) and PoE+
- ✓Available in 0.5–30 m, PVC or LSZH jacket
Full Specifications
Overview
Type
Cat6 U/UTP patch cord
Standard
TIA/EIA-568.2-D Cat6 (Class E)
Application
Switch-to-panel, equipment patch links
Connector
RJ45 8P8C unshielded, 50 µ" gold plated
Length Options
0.5 / 1 / 1.5 / 2 / 3 / 5 / 10 / 15 / 20 / 30 m
Electrical Performance
Frequency Range
1–250 MHz
Characteristic Impedance
100 ± 15 Ω
Insertion Loss
≤ 0.2 dB @ 250 MHz (1 m, typical)
Return Loss
≥ 20 dB (typical)
NEXT
Meets Cat6 channel limits
Test
100% factory tested, results on request
Construction
Conductor
26 AWG (7×0.16 mm) stranded tinned copper
Insulation
High-density polyethylene (HDPE)
Separator
Center cross-spliner
Connector Boot
Molded PVC, snagless
Contact Plating
50 µ" gold on 100 µ" nickel
Jacket
PVC or LSZH
Installation & Environment
Bend Radius
4× outer diameter
Temperature Range
-10 °C to +60 °C
Insertion Cycles
≥ 750 mating cycles
PoE Support
IEEE 802.3af/at (PoE/PoE+)
Cable Management
Hook-and-loop tie per cord
Packaging
Package
Polybag with label, box of 10 / 50
Color Options
Grey, blue, yellow, red, green
Certifications
CE, RoHS, REACH
Custom Lengths
OEM lengths and colors on request
Specifications are indicative for the standard configuration and subject to change with continuous product improvement. Confirm final parameters with our sales team for your order.